-
Excavator Boom Arm
-
Long Reach Excavator Booms
-
Excavator Telescopic Boom
-
Demolition Boom
-
Excavator Pile Driving
-
Excavator Rock Bucket
-
Excavator Rock Ripper
-
Excavator Tunnel Boom
-
Mechanical Excavator Grab
-
Hydraulic Log Grapple
-
Excavator Sliding Arm
-
Excavator Standard Arm
-
Excavator Thumb Bucket
-
Ditch Cleaning Bucket
-
Excavator Tilt Bucket
-
Excavator Skeleton Bucket
-
David CordovaHigh quality excavator boom with good price! I like it very much, so I brought 2 units of demolition arm again. The whole process went smoothly. Next time I need to buy excavator arms, I will buy them from here.
-
Vaina ConroyVery happy with the service provided. All questions were answered promptly. The product was as described and arrived on time. Great packaging. The biggest surprise was that the welding quality of the product exceeded my expectations.
-
William HollisterVery helpful. The excavator long reach arm I purchased are solidly built, well made and I have no doubt they will last for many years.
Two Section Excavator Demolition Boom Long Reach 14-24m Durable
Material | Q355B | Warranty | 1 Year |
---|---|---|---|
Weight | 3 Ton | Length | 14-24m |
High Light | Two Section Demolition Boom,14m Demolition Boom,24m Excavator Long Reach |
Two - section demolition arm of excavator for high - rise building demolition -Quality durable excavator long reach
Two-section demolition arm
Model | Boom Length | Arm length | Fold Height | Max Work range | Max reach height | Max Cut depth | Bucket cylinder | Breaker chisel diameter | Self weight |
12T | 7.8m | 5.2m | 2.9m | 12m | 13m | 7m | 6T | 65 | 3T |
20T | 9.5m | 6.5m | 3m | 15m | 16m | 10m | 12T | 100 | 4T |
25T | 10.5 | 7.5 | 3m | 17m | 17m | 11m | 20T | 100 | 4.2T |
30T | 11.5m | 8.5m | 3.2m | 19m | 20m | 13m | 20T | 135 | 6T |
35T | 12.5m | 9.5m | 3.2m | 21m | 22m | 15m | 22T | 135 | 6.5T |
40T | 13.5m | 10.5m | 3.5m | 23m | 24m | 17m | 22T | 140 | 7.5T |
45-50T | 15m | 11m | 3.5m | 25m | 26m | 18.8m | 25T | 140 | 8.2T |
product presentation:
1. Material: Sheet material is Q355B, the hydraulic steel pipes are Cold drawn seamless steel pipe, the pin material is 40Cr, the high pressure hose is joint venture pipe with 4 layers of wire coil, the butter pipe is single layer hose, and the bushing into the large arm base is graphite alloy copper sleeve.
2. Configuration: 1pcs boom,1pcs arm, 4pcs pins, 2 stop valves, 1pcs bucket cylinder,1 kit high pressure hose and 1 kit linkage.
3. Product advantages: The size of the arm designed by our company is reasonable, the demolition arm can rotate normally after the crushing hammer, the large and medium arms can open at 163 degrees, and the overall removal height will be higher.The overall production process is ahead of the average level of the industry, and the quality of the products is better than that of the same grade. 4. Suitable working conditions for building demolition arm: reconstruction in urban villages, building demolition, old factory building renovation, high-rise demolition project, etc.