|Part Name:||Boom/Arm/Bucket Cylinder||Application:||Crawler Excavator|
|Material:||Q345B||After-sales Service Provided:||Online Support|
Excavator Boom Arm 18M,
47ton Excavator Boom Arm,
Wear Resistant Long Boom Arm
The two-stage lengthened arm can not change the installation method and performance of the original excavator, but greatly improve the scope of operation. It is mainly used for earthwork, deep cutting excavation, river dredging and so on
|Excavator Ton||Total Length(mm)||(A)Boom
|Maximum Digging Radius(mm)||Maximum Digging Depth(mm)||Maximum Unloading Height(mm)||Maximum Digging Height(mm)||Bucket Volume(cbm)||Cylinder(ton)|
-Reinforced arm and boom to withstand high-impact.
-Reinforced plates to provide greater protection. The bearing parts have been strengthened.
RUGGED FRONT ATTACHMENT
The heavy-duty front
attachment is built using high- tensile strength(Q355B)extra
thick steel plates that provide greater durability than most of Long Reach Arms available
1. Pocket and dimple surface pattern--traps grease to optimize lubrication.
2. Wear resistant solid lubricant coating--provides noise free and enhnaces anti-seizure property.
3. 30% longer life--compared to normal steel bush surface pattern.
1. Suitable for all brand excavator.
2. Color, material can do according to you.
3. Boom cylinder, stick cylinder and extra pipeline are optional.
STRONG PRODUCTION CAPACITY:
Our annual output of various types of excavator boom arms can reach 600 sets.
1 year for excavator boom arm boay, 6 months for cylinders and linkage, 3 months for bucket.
Q1: How long is the boom arm can the min excavator be configured with? Whether it is necessary to increase the counterweight?
A1. Generally speaking, 30-40 excavator longest arm suggests to be 8 meters, can configure 0.1 cbm bucket, no need extra counterweight. 55 excavator longest arm suggests to be 12 meters, and can configure 0.1-0.15 cbm bucket, need 0.5 ton extra counterweight. 60-80 excavator longest arm suggests to be 12 meters, can configure 0.15-0.25 cbm bucket, need 0.5-0.7 ton extra counterweight.
It is not recommended to extend boom arm to the longest length as min excavator is easy to slosh.
Q2: How long will it take to install an excavator long reach boom?
A2: It depends on the installer and machine size.
Usually disconnecting the original boom arm, stick cylinder, then pin the new one is okay.
Kindly remind, to prepare several containers to fill the oil before disassembling.
Contact Person: Sophia